To monitor and view your AcuRite sensor readings from AcuRite NOW™, an AcuRite Iris (5 in 1) or an AcuRite Atlas (7 in 1) Legacy Direct to Wi-Fi Display (Connection Device) must be added to your account. Once added, you can then link your AcuRite sensor(s) to the Legacy Direct to Wi-Fi Display - allowing the readings to be sent to your Connection Device Home screen in the AcuRite NOW™ app.
Before following the steps below, please make sure you have connected the Legacy AcuRite Direct To Wi-Fi Display to your Home Wi-Fi by following the steps in the Legacy Direct to Wi-Fi Weather Station Wi-Fi Setup Through AcuRite NOW™ Article.
AcuRiteNOW™ app: How to add an AcuRite (5 in 1) or an AcuRite Atlas (7 in 1) Legacy Direct to Wi-Fi Display Connection Device
- Open your AcuRite NOW™ app on your smartphone or tablet. If you are logged into the App you should see the Home screen that will show any connected devices.
- Next, in the upper right corner of the screen TAP on the "+" Icon
- Next, TAP on the Add Device option.
- Next, on the Add Device screen TAP the Add MyAcuRite Legacy Devices option.
- Next, on the Device Profile screen, enter the last 6 digits of the 12 Digit Device ID located on the back of the Indoor Display Unit or in the battery compartment of the Indoor Display Unit.
- Next, after entering the last 6 digits of the 12 digit Device ID, TAP the Continue button.
- You should now see the sensor screen in AcuRite NOW™
The following article will walk you through adding the sensor to your AcuRite NOW™ account:
Adding A Sensor To A Legacy Direct to Wi-Fi Display
If you are still experiencing concerns, please contact our U.S. based support staff by Submitting a Request or by chatting with our Live Agents. If you already have an open ticket with a support agent, please reply to the last email sent.