3-in-1 Inaccurate Temperature or Humidity

Follow

If the temperature or humidity is inaccurate. 

  1. Make sure both the display unit and 3-in-1 sensor are placed away from any heat sources or vents.
  2. Make sure both the display unit and 3-in-1 sensor are positioned away from moisture sources.
  3. Make sure 3-in-1 sensor is mounted at least 5 ft off of the ground.
  4. Confirm the display is showing 4 full bars of signal strength. Refer to article  3-in-1 Reset
Was this article helpful?
2 out of 70 found this helpful