You are able to stream data online to Weather Underground through the AcuRite NOW app using both the Bluetooth-enabled Direct to Wi-Fi Displays and our Legacy Iris 5 in 1 and Atlas 7 in 1 Direct to Wi-Fi Displays and the Legacy AcuRite Access device. This article will cover the steps for doing so for each device.

Streaming to Weather Underground Using AcuRite NOW+.

To stream data online using AcuRite NOW+, you will first need to purchase an AcuRite NOW+ Subscription to receive a Pass-key that can be used to activate the Weather Underground boxes on AcuRite NOW. This can be found directly within the app or on our website here:
https://www.acurite.com/products/acurite-now?selling_plan=2938339441&variant=42452016791665

Streaming to Weather Underground From a Bluetooth-enabled Direct to Wi-Fi Display Using AcuRite NOW+:

1. Open the AcuRite NOW™ App. You will see the All Devices screen.
   
   
    
2. Tap on the Bluetooth-enabled Direct to Wi-Fi Connection Device on your screen.
   
   
    
3. Scroll down on the Home screen, at tap on the AcuRite NOW+ Button at the bottom of the screen.
   
   
    
4. Enter in your AcuRite NOW+ Pass Key in the white box.
   
   
    
5. Once entered tap the ACTIVATE AcuRite NOW+! button.
   
   
    
6. Enter in the Weather Underground Station ID and Station Key into the two boxes at the bottom of the screen.
   
   
    
7. Tap the ACTIVATE AcuRite NOW+ button.
   
   
    
8. Tap on the OK button for the Verification Popup.
   
   
    
9. The button should now say Deactivate Sensor On AcuRite NOW+. You will also see a button at the bottom of the screen that says Stop Streaming to WU.
   
   
    
10. Tap the Back icon in the top left corner of the screen to go back to the Sensor Dashboard.
    
    
     
11. Tap the X button in the upper right corner of the screen to go back to the All Devices Page.
    
    
     

Streaming to Weather Underground From a Legacy AcuRite Direct To Wi-Fi or PC Connect Display Using AcuRite NOW+:

1. Open the AcuRite NOW™ App. You will see the All Devices screen.
   
   
    
2. Tap on the Legacy Direct to Wi-Fi or PC Connect Connection Device.
   
   
    
3. Tap on the Sensor Icon to the right of the Sensor Name.
   
   
    
4. Scroll down to the bottom of the Sensor Status screen and tap on the Click here to go to Activate! Button.
   
   
    
5. Enter in the AcuRite NOW+ Pass Key in the white box then tap Activate AcuRite NOW+! Button
   
   
    
6. The button should change to red and now say Deactivate Sensor On AcuRite NOW+
   
   
    
7. Enter in the Weather Underground Station ID and Station Key and tap the Start Streaming This Sensor To WU! Button.
   
   
    
8. The button should change to Stop Streaming to WU.
   
   
    
9. Tap the back icon in the upper left hand side of the screen.
   
   
    
10. Tap the X icon in the upper right hand side of the screen to return to the All Devices Screen.
    
    

Streaming to Weather Underground From a Legacy AcuRite  Access Using AcuRite NOW+:

1. Open the AcuRite NOW™ App. You will see the All Devices screen.
   
   
    
2. Tap on the Access Connection Device.
   
   
    
3. Tap on the Sensor Icon for the sensor you want to stream online to Weather Underground.
   
   
    
4. Scroll down to the bottom of the Sensor Status screen and tap on the Click here to go to Activate! Button.
   
   
    
5. Enter in the AcuRite NOW+ Pass Key in the white box then tap Activate AcuRite NOW+! Button
   
   
    
6. The button should change to red and now say Deactivate Sensor On AcuRite NOW+
   
   
    
7. Enter in the Weather Underground Station ID and Station Key and tap the Start Streaming This Sensor To WU! Button.
   
   
    
8. The button should change to Stop Streaming to WU.
   
   
    
9. Tap the back icon in the upper left hand side of the screen.
   
   
    
10. Tap the X icon in the upper right hand side of the screen to return to the All Devices Screen.