We have put together some of the most frequently asked questions for the PC Connect software.
There is no USB mode setting in PC Connect. You may need to set the USB Mode on your Weather Station Indoor Display unit as indicated below. The model number is located on the back of the Indoor Display.
Weather Station models 02064 and 01536 - there is no USB Mode setting on the display. Simply open the PC Connect software and connect the Indoor Display to your computer using the supplied USB cable.
Weather Station models 01025, 01035, 01036, 01525 or 02032 - before you connect the Indoor Display to your computer, from the SET menu on the Indoor Display, cycle through the settings to USB MODE or PC CONNECT MODE and then using the up arrow set to 3 or 4 and press SET to save the setting.
Data is sent to Weather Underground as often as every 18 seconds.
No. Software updates are posted on our web site. To view the latest PC Connect software version, from a web browser, go to > www.acurite.com > select Support> from the Categories section select Downloads > select PC Connect Download.
The current version installed on your computer is listed in the lower left corner of the PC Connect software screen (example v.2.0.0)
Before you install the latest version, be sure to uninstall any earlier versions.
If the Data Transfer CSV file is open when a data transfer is scheduled to occur, PC Connect cannot write to the open file and the data scheduled to be transferred will be lost. To avoid a loss of data, the Data Transfer file must be closed during scheduled transfers.