Create a custom alert

Follow

The Alert Builder guides you through creating a Custom Alert - including setting the condition that results in an alert, assigning the sensor that is located in the area you are monitoring, and selecting the contacts that are to receive a notification when an alert is activated.

Note

To create an alert for a sensor, the sensor must be linked to a Connection Device.

AcuRite app: How to create a custom alert

  1. From the tab / navigation bar, tap ic_settings_black_24px.svg (Settings menu).

  2. Select Manage Alerts.

  3. From the upper right corner, tap the ic_add_alert_black_24dp_1x.png icon.

  4. Scroll to select an Alert Type and select Select Alert.

    Alert Type - select the type of condition to be monitored by the Alert Rule. What type of condition are you monitoring? For example, are you monitoring the temperature outside or maybe the temperature inside a room at your home.

  5. Select the sensor the alert applies to - be sure the sensor is located in the area you are monitoring.

  6. Enter the conditions that are to result in an alert. The conditions vary by the alert type selected. If you do not have a sensor required for the alert type selected, you are notified.

  7. Delivering alert to - all of your alert contacts are listed. Select who alert notifications are to be delivered to. A check mark appears next to the name of each contact that will receive alert notifications. By default, alerts are sent to your Default Contact.

  8. Push Notifications - set to ON by default.

  9. Select Save Alert.

MyAcuRite.com: How to create a custom alert

  1. From the menu, select Settings > Alert Rules.

  2. From Alert Rules, select + Add.

  3. Provide the settings.

    If <Alert Type > is <Condition> on <Location>.

    Alert Type - select the type of condition to be monitored by the Alert Rule. What type of condition are you monitoring? For example, are you monitoring the temperature outside or maybe the temperature inside a room at your home.

    Condition- set the conditions that activates the alert.

    Location - select the sensor that is located in the area you are monitoring.

    Silence notifications for this alert - when enabled (check mark appears in setting), you can only view active alerts from the Alerts menu. If this alert is not that critical, you may choose to silence its notifications.

    Send Alert to - select the Alert Contacts that are to receive a notification when an alert is activated. A check mark indicates the contact is set to receive a notification.

    To add a new contact, select Add a Contact Method and add a contact.

    To remove a contact, select the check box to remove the check mark.

  4. Select Save.

Was this article helpful?
0 out of 0 found this helpful