Set Reading Calibration

Follow

When sensor placement or an environmental factor may impact readings, setting a reading calibration can improve accuracy. Calibrated readings are shared with My AcuRite™ and Weather Underground, and stored in the Data Transfer CSV file.

You can set a reading type to a positive or negative degree of calibration. When a reading calibration is adjusted, the reading is offset by the set amount. For example, setting the temperature calibration to '-10' results in its readings to be displayed as 10 degrees less than what is actually measured by the sensor.

 

How to set reading calibrations

  1. From the Preferences section, select Calibrate Readings (+/-).

  2. Set the reading calibration(s).

    calibrate-readings.png
  3. Select DONE to save your changes.

Was this article helpful?
0 out of 10 found this helpful