When you remove a sensor, the sensor is removed from the Dashboard tab of the AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device). The sensor readings are no longer sent to My AcuRite® by the Connection Device. Its past readings cannot be viewed from your account. If you were to link the sensor back to a Connection Device at a later date, its past readings and settings are not available.
MyAcuRite.com: How to remove a sensor from the My AcuRite® Dashboard
- From the menu, select Settings > Devices.
- Select the name of the Connection Device the sensor is linked to.
- From the My Sensors list, select the name of the sensor to remove and click the
button. - The sensor will automatically be deleted.
My AcuRite® app: How to remove a sensor from the My AcuRite® Dashboard
-
From the tab/navigation bar, select
(Settings menu). -
Select Manage Devices.
-
Select the name of the Connection Device the sensor is linked to.
-
From the My Sensors list, select the name of the sensor to remove.
-
From the upper-right corner, select
. -
Select Yes, Remove.
NOTE: If the sensor continues to be in the wireless range of the AcuRite Access®, the PC Connect Display is connected to your computer with the installed PC Connect software, or the Direct to Wi-Fi Display remains connected to your Wi-Fi network and paired with the sensor, the sensor is displayed as an Available Sensor. Its readings are not sent to your My AcuRite® Dashboard.
Once removed, it may take up to 10 minutes for a removed sensor to appear in the Available Sensors list.