My AcuRite® sensor readings, chart data, and alert notifications are displayed in the Time Zone set in the profile of an AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device).
By default, the Time Zone is generated from the Postal Code set in the address of a device profile. You can set the Time Zone to a specific region. For example, if you have multiple devices in different geographic regions, you may want to view all reading data in a specific Time Zone, which you would then set the devices to the same Time Zone.
NOTE: PC Connect Display (Iris® (5-in-1) Weather Station) only - setting the Time Zone in My AcuRite® does not set the time zone of the reading data exported to a CSV file or the reading data transmitted to Weather Underground. All reading data is timestamped with the computer's local time.
-
From the tab/navigation bar, select
(Settings menu). -
Select Manage Devices.
-
Select the device name.
-
Select the
icon located to the right of the device name. -
Time Zone is set in step 3 of 4. From step 3 update the Time Zone and select Next.
-
Select Save to update.
Sensor readings, chart data, and alert notifications of the Connection Device are now displayed in My AcuRite® with the updated Time Zone.
-
From the menu, select Settings > Devices. Each device added to your account is listed.
-
From the device, select Edit.
-
Update its Time Zone.
-
Select Save to update.
Sensor readings, chart data, and alert notifications of the AcuRite Access® or PC Connect Display are now displayed in My AcuRite® with the updated Time Zone.