You should perform the reset steps below if you experience the following:
- Partial Digits or Missing Segments on the Display
- Incorrect/Inaccurate Indoor Temperature or Humidity
- Backlight does not stay on, flashes, is too dim, or will not dim.
- The Ticker on the bottom of the display is showing X's, 8's, or is scrambled
- Inaccurate 12-24 hour Future Forecast
- Inaccurate Barometric Pressure Reading
- Clock/Time is Fast or Slow
To reset using the RESET button located in the battery compartment of the display or clock:
(THIS WILL CLEAR ALL OF YOUR HISTORY AND YOUR SETTINGS)
- Please verify that you are using recommended batteries as well as the included power adapter, if applicable.
- Remove all power, (AC adapter and batteries) from the display unit.
- Press and hold down the reset button, located in the battery compartment for 20 seconds.
- Restore power by plugging into AC power or installing batteries. If AC powered, leave backup batteries out for now.
- Press and hold down the reset button for an additional 20 seconds.
- Verify that the unit has powered on and once a connection has been made, attempt to set the time and date. You can then insert recommended backup batteries into the display.
If your display or clock does not include a RESET button located in the battery compartment:
(THIS WILL CLEAR ALL OF YOUR HISTORY AND YOUR SETTINGS)
- Please verify that you are using recommended batteries as well as the included power adapter, if applicable.
- Remove the batteries and unplug the unit, if applicable, for a full five minutes to let the display power down completely then reinstall the batteries.