Set Time and Date on LCD Indoor Display

Follow

If your indoor display features a clock and/or calendar, you can use the steps below to set the time and date. 

 

The time settings are located in the SET MODE:

  1. To access the SET MODE, press and hold the "gear" or "SET" button for 10 seconds.
  2. Use the  "+" or "-" or "UP" or "DOWN" arrow buttons to adjust the currently flashing setting until the desired value is displayed.
  3. Press the "gear" or "SET" button to confirm this setting and move on to the next setting. The preference set order is as follows:
    TIME ZONE (EST, CST, MST, PST, AKT, HAT, NST, AST)
    AUTO DST CHANGE (YES, NO)*
    CLOCK HOUR
    CLOCK MINUTE
    CALENDAR MONTH
    CALENDAR DATE
    CALENDAR YEAR
    (All displays may not feature all of these settings.)
  4. If no buttons are pressed for 5-10 seconds, the unit will exit SET MODE. To access the SET MODE at any time, press and hold the "gear" or "SET" button for 10 seconds.

*If you live in an area that observes Daylight Saving Time, DST should be set to YES, even if it is not currently Daylight Saving Time.

Was this article helpful?
4 out of 6 found this helpful