If your clock features an alarm, you can use the steps below to enable and program the alarm feature. Procedures are listed by model number for both Digital and Analog Alarm Clocks. 

To enable/disable the alarm feature if your clock features an "ALARM" switch:

For use with models 13020, 01129, 13040, 13001, 47391, 13024, and 47311.

To turn the alarm on: Slide the “ALARM” switch to “ON”. The Alarm On indicator will appear on the display.
To turn the alarm off: Slide the “ALARM” switch to “OFF”. The Alarm On indicator will disappear from the disappear.

To enable/disable the alarm feature if your clock does not feature an "ALARM" switch:

For use with models 13239, 13131, 13019, and 13030.

To Turn the Alarm on: Press the “ALARM ON/OFF” button until the "ALARM ON" and/or "bell" icon appears on the screen.
To Turn the Alarm off: Press the “ALARM ON/OFF” button until the "ALARM ON" and/or "bell" icon disappears from the screen.

To silence the alarm on a Vintage Alarm Clock:

For use with models 15605 and 15607.

Push the ALARM SWITCH down or close the ALARM LEVER.

Digital Alarm Clocks:

To program your desired alarm time:

13020

Press and release the “clock/wrench” button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “clock/wrench” button to adjust the next preference.
The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
ALARM EVERY DAY or WEEKDAY ONLY SELECTION
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter setup mode at any time by pressing the “clock/wrench” button.

01129/13040

To set the alarm time, press and RELEASE the "SET" button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter ALARM SET MODE at any time by pressing and RELEASING the "SET" button.

13239

Press and release the ALARM ADJUST button to enter ALARM SET mode.
To adjust the currently selected (flashing) item, press and release the “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the ALARM ADJUST button to adjust the next preference.
The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
VOLUME
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter ALARM SET MODE at any time by pressing the ALARM ADJUST button.

13131

Press AND HOLD the “ALARM ON/OFF ” button for 5 seconds to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM ON/OFF“ button to adjust the next preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 60 seconds. Enter ALARM SET MODE at any time by pressing and holding the “ALARM ON/OFF“ button for 5 seconds.

13019/13030

To set alarm time, press the “ALARM SET” button once to review alarm time.
Press the “ALARM SET” button again to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “+” or “–“ or “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM SET“ button to adjust the next preference.
The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 30 seconds. Enter ALARM SET MODE at any time by pressing the “ALARM SET“ button twice.

13001

To set alarm time, press and release the “ALARM” button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “+ FORWARD” or “- BACKWARD” buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “ALARM“ button to adjust the next preference.
The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter ALARM SET MODE at any time by pressing the “ALARM“ button.

13024

Slide Alarm #1 and/or Alarm #2 switch ON (alarm time cannot be adjusted if the alarm is OFF).
Press and release the “wrench/clock 1” or the “wrench/clock 2” button to enter ALARM SET MODE.
To adjust the currently selected (flashing) item, press and release the “UP” or “DOWN“ arrow buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “wrench/clock 1” or the “wrench/clock 2” button to
adjust the next preference.
The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
ALARM EVERY DAY or WEEKDAY ONLY or WEEKEND ONLY
You will automatically exit ALARM SET MODE if no buttons are pressed for 5 seconds. Enter ALARM SET MODE at any time by pressing the “wrench/clock 1” or the “wrench/clock 2” button.

47391 Travel Alarm Clock

To set alarm time, slide the SET switch to the ALARM SET position. The AL indicator will appear on the display.
To adjust the alarm time, press and release the HOUR button to adjust hours or the MINUTE button to adjust the minutes (press and HOLD to fast adjust). (Please note AM/PM indicator)
To save your adjustments, slide the SET switch to the RUN position.

Analog Alarm Clocks

To program your desired alarm time:

15605

1. Turn ALARM SET in the direction of the arrow to the alarm time.
2. Wind the ALARM WIND KEY in the direction of the arrow. The alarm
will automatically be set to go off each time the ALARM KEY is wound.
3. Open the ALARM LEVER on top in order for the alarm to sound.

15607

1. Turn ALARM SET in the direction of the arrow to the alarm time.
2. Wind the ALARM WIND KEY in the direction of the arrow. The alarm
will automatically be set to go off each time the ALARM KEY is wound.
It is not necessary to pull out the ALARM SWITCH.

47311 Analog Travel Alarm Clock

Set the Alarm Time
Turn the ALARM SET dial on the back of the clock counterclockwise until the alarm indicator reaches
desired waking time. Slide the ALARM ON/OFF switch to the ON position. The alarm will sound
at the indicated time (AM and PM).