Sharing with Weather Underground

Follow

You can easily share your outdoor readings with Weather Underground. Once your Weather Underground Sharing profile is set up, the readings are automatically sent to Weather Underground by way of Rapid Fire updates. Weather Underground Sharing is limited to a single AcuRite Access or Direct to Wi-Fi Display and one (1) sensor.

NOTE: For PC Connect users only, Weather Sharing is configured within the PC Connect software installed on your computer. Do not use these steps to share with Weather Underground if using PC Connect.

 

Before you begin

  • Register with Weather Underground to obtain a Station ID and Station Key.

  • Verify sharing online is enabled for the Connection Device you want to share. From the menu, select Settings > Share Weather > Enable Online Sharing.

 

 

AcuRite app: How to set up sharing with Weather Underground

  1. From the tab/navigation bar, tap the ic_settings_black_24px.svg (Settings menu).

  2. Select Share Weather.

  3. Verify that Enable Device Sharing is enabled (ON).

  4. Select Setup Weather Underground.

  5. Enter your Weather Underground Station ID.

    NOTE: Be sure to enter the ID exactly as it's displayed in your Weather Underground account - in all capital letters and is almost always comprised of eight letters and one to three numbers. If you have an "O" or "I" as the last letter before the number(s), it's very easy to mistake it as a number.

  6. Enter your Weather Underground Password (Station Key).

    NOTE: We recommended not to copy and paste this information. The Weather Underground Station Key is case sensitive and does not allow special characters. The password for your weather station is no longer the same as the password for your wunderground.com account. It is now a separate key (Station Key) that is generated specifically for each Weather Underground station ID.

    My AcuRite does not validate the Password (Station Key) entered with Weather Underground.

  7. Select the Connection Device linked to the sensor.

  8. Select the sensor. Only one (1) sensor can be shared with Weather Underground.

  9. Select Save.

 

 

AcuRite app: How to delete your Weather Underground Sharing Profile

  1. From the tab/navigation bar, Select ic_settings_black_24px.svg (Settings menu).

  2. Select Share Weather.

  3. From the Sharing to Weather Underground, Select on the Profile Name.

  4. From the upper-left corner, Select the mceclip0.png icon.

 

MyAcuRite.com: How to set up sharing with Weather Underground

  1. From the menu, select Settings > Share Weather.

  2. Verify that Enable Device Sharing is enabled (ON).

  3. Under Sharing to Weather Underground, click +Add.

  4. Enter your Weather Underground Station ID.

    NOTE: Be sure to enter the ID exactly as it's displayed in your Weather Underground account - in all capital letters and is almost always comprised of eight letters and one to three numbers. If you have an "O" or "I" as the last letter before the number(s), it's very easy to mistake it as a number.

  5. Enter your Weather Underground Password (Station Key).

    NOTE: We recommended not to copy and paste this information. The Weather Underground Station Key is case sensitive and does not allow special characters. The password for your weather station is no longer the same as the password for your wunderground.com account. It is now a separate key (Station Key) that is generated specifically for each Weather Underground station ID.

    My AcuRite does not validate the Password (Station Key) entered with Weather Underground.

  6. Select the Connection Device linked to the sensor.

  7. Select the sensor. Only one (1) sensor can be shared with Weather Underground.

  8. Select Save.

 

 

MyAcuRite.com: How to delete your Weather Underground Sharing Profile

  1. From the menu, select Settings > Share Weather.
  2. From the Sharing to Weather Underground section, Select the circle next to the connection you wish to delete.
  3. Once selected, click  mceclip0.png.

 

If you would like further assistance, please contact our U.S. based support staff by emailing us at support@chaney-inst.com or by chatting with our Live Agents. If you already have an open ticket with a support agent, please reply to the last email sent. 

 
 
Was this article helpful?
7 out of 34 found this helpful