Link a Sensor to an AcuRite Access or PC Connect Display

Follow

You must link a sensor to an AcuRite Access or PC Connect Display to monitor and view its sensor readings from your My AcuRite account. Once linked, its readings are sent to your My AcuRite Dashboard.

AcuRite app: How to link a sensor to the AcuRite Access or PC Connect Display

  1. From the tab / navigation bar, select ic_settings_black_24px.svg (Settings menu).

  2. Select Manage Devices.

  3. Select the name of the AcuRite Access or PC Connect Display you want to link the sensor to.

  4. From Available Sensors, select the sensor name.

  5. Select Yes, Add.

  6. Set the sensor settings.

    Device Name - be sure to enter a name that uniquely identifies the installation location of the sensor. The name is displayed in the Dashboard tab of the AcuRite Access or PC Connect Display it's linked to.

    Calibrate Reading (optional setting) - when sensor placement or an environmental factor may impact its readings, setting a reading calibration can improve accuracy. When a reading calibration is adjusted, the reading is offset by the set amount. For example, setting the temperature calibration to a -10 results in its readings to be displayed as 10 degrees less.

    Sensor Location - only applies to sensors that can be either located indoors or outdoors.

  7. Select Save Settings.

The sensor is linked to the AcuRite Access or PC Connect Display. The sensor is listed in My Sensors and its readings will be sent to your My AcuRite account.

 

MyAcuRite.com: How to link a sensor to the AcuRite Access or PC Connect Display

  1. From the menu, select Settings > Devices.

  2. Locate the name of the device you want to link the sensor to.

  3. From Available Sensors, select + Add next to the sensor you want to link to the AcuRite Access or PC Connect Display.

  4. Enter the sensor settings:

    Device Name - be sure to enter a name that uniquely identifies the installation location of the sensor. The name is displayed in the Dashboard tab of the AcuRite Access or PC Connect Display it's linked to.

    Calibrate Reading (optional setting) - when sensor placement or an environmental factor may impact its readings, setting a reading calibration can improve accuracy. When a reading calibration is adjusted, the reading is offset by the set amount. For example, setting the temperature calibration to a -10 results in its readings to be displayed as 10 degrees less.

    Sensor Location - only applies to sensors that can be either located indoors or outdoors.

  5. Select Save.

The sensor is linked to the AcuRite Access or PC Connect Display. The sensor is listed in My Sensors and its readings will be sent to your My AcuRite Dashboard.

 
 
Was this article helpful?
0 out of 0 found this helpful