Remove a sensor from a AcuRite Connection Deviceor PC Connect Display

Follow

You may need to remove a sensor from a AcuRite Connection Deviceor PC Connect Display due to a warranty return or other condition.

When you remove a sensor from a AcuRite Connection Deviceor PC Connect Display

The sensor is removed from the Dashboard tab of the AcuRite Connection Deviceor PC Connect Display.

The sensor readings are no longer sent to My AcuRite by the AcuRite Connection Deviceor PC Connect Display.

Its past readings cannot be viewed from your account. If you were to link the sensor back to a AcuRite Connection Deviceor PC Connect Display at a later date, its past readings and settings are not available.

AcuRite app: How to remove a sensor from a AcuRite Connection Deviceor PC Connect Display

  1. From the tab / navigation bar, select ic_settings_black_24px.svg (Settings menu).

  2. Select Manage Devices.

  3. Select the name of the AcuRite HUB device or PC Connect Display the sensor is linked to.

  4. From the My Sensors list, select the name of the sensor to remove.

  5. From the upper-right corner, select ic_delete_forever_black_24px.svg.

  6. Select Yes, Remove.

Note

If the sensor continues to be in wireless range of the AcuRite Connection Device or the 5-in-1 Indoor Display is connected to your computer with the installed PC Connect software, the sensor is displayed as an Available Sensor. Its readings are not sent to your My AcuRite account.

MyAcuRite.com: How to remove a sensor from a AcuRite Connection Deviceor PC Connect Display

  1. From the menu, select Settings > Devices.

  2. Select the name of the AcuRite Connection Deviceor PC Connect Display the sensor is linked to.

  3. From My Sensors, select ic_delete_black_24px.svgRemove from the sensor to remove.

  4. Select Yes - Remove.

The sensor is removed from the Dashboard tab of the AcuRite Connection Deviceor PC Connect Display and its readings are no longer sent to your My AcuRite account.

Note

If the sensor continues to be in wireless range of the AcuRite Connection Device or the Indoor Display is connected to your computer with the installed PC Connect software, the sensor is displayed as an Available Sensor. Its readings are not sent to your My AcuRite account.

Was this article helpful?
0 out of 0 found this helpful