Additional Sensors Not Connecting to Display

Follow

If the Digital Thermometer is being paired with more than one 592TXR / 06002RM Temperature & Humidity Sensor, and the display is unable to connect to to the additional sensor or sensors, verify the sensors are set to different A-B-C channels.

  1. Remove the batteries from the Temperature & Humidity Sensors.
  2. Locate the A-B-C switch inside the battery compartment of each sensor.
  3. Verify the sensors are set to different channels from each other. If multiple sensors are on the same letter channel, move the switches so that no two sensors are on the same channel.

NOTE: A hard reset may need to be performed to connect to the newly configured sensors. Consult the Digital Thermometer manual for additional setup instructions.

Was this article helpful?
0 out of 1 found this helpful