Weather Underground Through My AcuRite


Below are the instructions for setting up MyAcuRite to share with Weather Underground:

  1. Go to, create an account and register your station to create a station ID.
  2. Once you have the station ID, go to your My AcuRite Account. Click Settings>Share My Weather.
  3. On this screen you will see "Connections" near the top.
  4. You want to make sure the box is checked to Allow Sharing from your device.
  5. Below you will see "Sharing to Weather Underground".
  6. Click the blue "Add" button to the right.
  7. A drop down will appear to add in your credentials. When you add them DO NOT COPY AND PASTE, You will want to type the Station ID and password.
  8. Select the Connection Device (this will be your AcuRite Access when connected).
  9. Next, you will select the sensor. This can be any sensor, however, choosing your 5 in 1 will provide the most information.
  10. Click the green "Save" button in the upper right hand corner.
  11. Allow at least 20 minutes for sharing on your Station ID.
Was this article helpful?
0 out of 7 found this helpful