No Monitor Sensor Reception

Follow

If the wireless signal indicator shows no bars:

  1. Relocate the display unit and/or the remote monitor. The units must be within 330 ft (100 m) of each other.
  2. Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
  3. In the sensor, use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries.
Was this article helpful?
0 out of 8 found this helpful