will my sensos work with Access

  • 1
  • Question
  • Updated 3 months ago
I'm currently running a 5-in-one and two AcuRite 06002M sensors on a smart hub.  Will I still be able to view all of this on an Access?
Photo of ron Camerata

ron Camerata

  • 4 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of George D. Nincehelser

George D. Nincehelser

  • 6513 Posts
  • 1209 Reply Likes
Yes.  If the sensor works on a SmartHUB, it will work on Access.
Photo of ron Camerata

ron Camerata

  • 4 Posts
  • 0 Reply Likes
They will work, but the 06002M is temperature and humidity and I have two of those.  So does the 06002M count as one sensor or two?  I'm assuming the 5-in-one counts as 5.  Is this correct?
Photo of George D. Nincehelser

George D. Nincehelser

  • 6513 Posts
  • 1209 Reply Likes
No.  The count is determined by the individual devices, not the individual sensors in a device.

In other words, a 5n1 sensor counts as 1 device against the limit.

A temp/humidity sensor also counts as 1 device.

So in your setup you're currently using 3 devices against your limit.
Photo of ron Camerata

ron Camerata

  • 4 Posts
  • 0 Reply Likes
Sweet!  I thought I was at 9 sensors and would lose two.  Thanks George.
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6145 Posts
  • 195 Reply Likes
Hello Ron,
George is correct. Any sensor that currently works with the smartHUB is compatible with the AcuRite Access. The monitor and wired sensor are considered one sensor.  For your convenience, I have provided a link below to the compatible sensors. Please let us know if you have any other questions. Thank you.

https://www.acurite.com/my-acurite/environmental-monitoring-sensors.html