smarthub sending readings that or off on dash board

  • 1
  • Problem
  • Updated 1 year ago
smart hub showing wrong readings to dash board. temp is 1 degrees low- humidity 2 degrees  low, feels like is 9 degrees low, dew point is 2 degrees low pressure shows 29.22 on dash board and display shows 30.22
Photo of Jeff Hagle

Jeff Hagle

  • 16 Posts
  • 0 Reply Likes

Posted 1 year ago

  • 1
Photo of Bill Martin

Bill Martin

  • 758 Posts
  • 127 Reply Likes
You might want to look at 5in1 specs for various metrics. Attached is a screen shot for some of them. In addition, what are you considering your "golden" standard for these metrics and where is it located?

Photo of Jeff Hagle

Jeff Hagle

  • 16 Posts
  • 0 Reply Likes
all i am saying if the display and the dash board are reading from the same 5 and 1 unit it should give u the same readings for out door, inside i dont care about. which one is correct and which one needs to be adjusted . some of the readings have become closer but some are way off as much as 10 points.  i do have to say the hub so far had connected easily. but on wonder underground temp and other stuff not working right, but that because of them there system is hosed up, it said unit it reporting once i signed up. i can live with one are two points off . going to start reporting to other sources as well
Photo of Bill Martin

Bill Martin

  • 758 Posts
  • 127 Reply Likes
You might be seeing 1of 2 items.


First: Display is basically real time being updated every 18-36 seconds while the Hub takes a snapshot every 5mins to post on MyAcurite.com. you can easily see wide discrepancies in Wind mph. Display can have higher speeds while the 5min sample from Hub might have a much lower wind mph.


Second: the Hub to MyAcurite.com data logging might have delays. Over past X months, people have seen anything from 15 mins up to 3 or more hours. This is easy to tell on rapidly changing metrics. Rain is perfect metric to compare Display vs. Dashboard. Much harder to tell on Pressure, Temple, etc.


You'll need to investigate if either of these apply to you.
(Edited)
Photo of Jeff Hagle

Jeff Hagle

  • 16 Posts
  • 0 Reply Likes
ok thanks i will watch for a while and see how its does over a week are so, can u speed up the reporting time are is it fixed 
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6411 Posts
  • 200 Reply Likes
Hello Jeff,

You cannot adjust the update speed on my AcuRite. The only way to update My AcuRite faster would be to manually update the page.  Please let us know if you have any other questions. Thank you.