Set my access pressure

  • 1
  • Question
  • Updated 7 days ago
How can I set the pressure in my access page to read closer to my Acurite page?
Photo of Jim Laursen

Jim Laursen

  • 45 Posts
  • 1 Reply Like

Posted 3 weeks ago

  • 1
Photo of George D. Nincehelser

George D. Nincehelser

  • 6513 Posts
  • 1209 Reply Likes
The "splash" page is for diagnostic purposes.  That's why it says "for internal troubleshooting".  You don't want to mess with trying to adjust the pressure displayed there.  It should be showing you the "absolute" or "station" pressure.

Your wunderground page and myAcurite page look to be in agreement.  Assuming you are also in agreement with nearby stations, I wouldn't touch anything... it looks like you're set up just right.
Photo of George D. Nincehelser

George D. Nincehelser

  • 6513 Posts
  • 1209 Reply Likes
Also, you should obscure the "Device ID" (MAC) and your wunderground password.

Some low-life might use those to vandalize your station data.
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6145 Posts
  • 195 Reply Likes
Hello Jim,
George is correct. The splash page is intended for internal use. The barometric pressure reading there is going to display the raw data from the Access rather then an adjusted or calibrated reading My AcuRite will provide if you have chosen the Adjusted option.  Thank you.