Bridge has 3 bars but 'no data' every hour

  • 1
  • Problem
  • Updated 3 years ago
  • (Edited)
I have two weather stations and an extra temperature sensor with one of them. Here are my issues:
I have a 5-1 with extra sensor. The temperature sensor on the 5-1 has been broken so I purchased the extra sensor. The 5-1 will only connect with the bridge two times a day while the extra sensor stays connected at all times. I have 3/4 bars on the extra sensor and nothing on the 5-1. I have changed the batteries twice with the same result. Is my 5-1 just too old now...it's about 3-4 years old.

My other issue is my 3-1 sensor located at another property. I have 3/4 bars on my backyard weather and the barometer is updating every minute, however, I go offline every other hour for about one to two hours at a time. The pic shows today's activity. I don't think it's the reception since I continue to have 3/4 bars. Could this be a bridge issue? My internet seems to be working fine.
Thanks
Photo of nic

nic

  • 13 Posts
  • 2 Reply Likes

Posted 3 years ago

  • 1
Photo of AcuRite Charlotte

AcuRite Charlotte

  • 3097 Posts
  • 156 Reply Likes
Hi Nic,

Please verify that the Bridge is not sitting on top of your router or PC, or directly next to either one. This can cause interference, and can keep the sensor data from updating properly.

Relocating the Bridge, even by a few inches, can greatly improve the signal strength.