Old SmartHub 09150TRX does not want to sync with new 06104 Sensor

  • 1
  • Problem
  • Updated 4 days ago
Recently my 4 year old 5in1 Sensor crapped out in 100+ temps, so we elected to replace with a newer 060104 5in1 Sensor. On arrival, we powered up the new Sensor expecting it to sync with SmartHub, and display show up on our 010336CCDI Color display.  At this time after 24 hours it has not done so, and see no signal indication on Color display. We also went into MyAcuRite app and deleted the old Sensor and then added the new Sensor.

The new Sensor is being received on our old 01055 display, with a strong & solid signal indicator.  We have rebooted all systems several times, and with the new Sensor about 3 ft. away from SmartHub, we still have no signal. Our color display is connected to our iMac via USB and on AC power adapter.  The Sensor does show on Weather Station Home in Safari with a signal strength of 4.  The SmartHub lights both stay on solid, and left ethernet light is blinking.
Currently at a loss as what to do next.
Photo of JAT

JAT

  • 11 Posts
  • 0 Reply Likes

Posted 2 weeks ago

  • 1
Photo of JAT

JAT

  • 11 Posts
  • 0 Reply Likes
Update-- Found that SmartHub was dropped from MyAcurite | Devices when deleted old Sensor.  Had to re-enter SmartHub and added to WU reporting.  Blue lights on, with Network light blink at 15 sec interval while Sensor light still solid.  Will wait overnight to see if connections finally made.
(Edited)
Photo of JAT

JAT

  • 11 Posts
  • 0 Reply Likes
Upate-- After 2 days and one full system re-boot no transfer of data.  Only network blue light occasional blink and sensor light solid. 
What can be the issue???  
Photo of JAT

JAT

  • 11 Posts
  • 0 Reply Likes
P.S.- Could we get some help from Acurite support?
Photo of JAT

JAT

  • 11 Posts
  • 0 Reply Likes
We withdraw this problem issue.
We have ditched the Acurite 5in1 and Acu-Link SmartHub for a Ambient Weather WS2901 Osprey station.  
Sorry Acurite!