No Projector on 13239 Clock, Except Short Duration Snooze

  • 1
  • Problem
  • Updated 4 months ago
My clock won't turn on the projector beyond shorts bursts when i push snooze. I am not on battery ... I don't even have any installed. I'm on AC power. I want the projector on all the time. I did turn switch to on, but it doesn't work.
Photo of John Accurite

John Accurite

  • 1 Post
  • 0 Reply Likes

Posted 5 months ago

  • 1
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6284 Posts
  • 199 Reply Likes
Hello John,

When this clock is plugged in the projector is on constantly by default. If your projector is not staying lit, please follow the troubleshooting steps listed below. If this does not correct the issue, the clock will need to be replaced. When and where was this purchased?  Thank you.


Please verify that you are using a name brand (Rayovac or Energizer) standard alkaline batteries in the display unit. We do not recommend using anything that is heavy duty, rechargeable, store brand or Lithium inside of the display.

- Remove all power, AC adapter and batteries from the display unit.
- Press and hold down the pin hole reset button, located in the battery compartment, for 20 seconds.
- Plug back into AC power and insert recommended batteries.
- Press and hold down the pin hole reset button for an additional 20 seconds.
- Verify that the unit has powered on and once connection has been made, attempt to set time and date.