Model # 06022. ..Backlight Display

  • 1
  • Problem
  • Updated 3 months ago
Display #06022...Backlight display doesn't come on unless I push the "bulb" button on back, then it is on for only about 10 seconds. I have performed a hard reset twice and this solves the problem until the power is interrupted. I would like the backlight to work without losing my data.
Photo of Peter Adams

Peter Adams

  • 1 Post
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6162 Posts
  • 195 Reply Likes
Hello Peter Adams,
The following instructions should help resolve any issues you are having with your display.

To do a pinhole reset: (THIS WILL CLEAR ALL OF YOUR HISTORY AND YOUR SETTINGS)

Please verify that you are using a name brand (Rayovac or Energizer) standard alkaline batteries in the display unit. We do not recommend using anything that is heavy duty, rechargeable, store brand or Lithium inside of the display.

- Remove all power, AC adapter and batteries from the display unit.
- Press and hold down the pin hole reset button, located in the battery compartment, for 20 seconds.
- Plug back into AC power and insert recommended batteries.
- Press and hold down the pin hole reset button for an additional 20 seconds.
- Verify that the unit has powered on and once connection has been made, attempt to set time and date.