Light not working on display model #01512a1

  • 1
  • Question
  • Updated 2 months ago
Lighted display stopped working. Changed batteries but it did not help. Hit the clear button and that did not work either.
Photo of Diane

Diane

  • 1 Post
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6284 Posts
  • 199 Reply Likes
Hello Diane,

The following instructions should help resolve any issues you are having with your display.

To do a pinhole reset: (THIS WILL CLEAR ALL OF YOUR HISTORY AND YOUR SETTINGS)

Please verify that you are using a name brand (Rayovac or Energizer) standard alkaline batteries in the display unit. We do not recommend using anything that is heavy duty, rechargeable, store brand or Lithium inside of the display.

- Remove all power, AC adapter and batteries from the display unit.
- Press and hold down the pin hole reset button, located in the battery compartment, for 20 seconds.
- Plug back into AC power and insert recommended batteries.
- Press and hold down the pin hole reset button for an additional 20 seconds.
- Verify that the unit has powered on and once connection has been made, attempt to set time and date.