icon descriptions

  • 1
  • Question
  • Updated 3 years ago
  • (Edited)
My 02032c console has an icon just to the right of the "percent" icon for outdoor humidity. It appears to be shaped like a wrench, maybe for a "tools"  or trouble alert???  I can't find a description for it anywhere. Anyone know what it is? The console and sensors seem to be working ok.   Thanks,  Gary    I just noticed the same icon to the left of the indoor temp digits?
Photo of Gary

Gary

  • 10 Posts
  • 1 Reply Like

Posted 3 years ago

  • 1
Photo of hafcanadian A

hafcanadian A

  • 51 Posts
  • 33 Reply Likes
As I recall, it means that particular data reader has been adjusted.  It's settings can be changed if you believe it's readings are off by a certain amount.  It is not the only adjustable feature.  The units seem to be fairly accurate right out of the box, but if another very reliable source, such as a local weathercaster or another device, is saying a given parameter is significantly different than your display's, you can adjust your 2032 up or down accordingly.  

The manual explains this on page 20 under "Calibration".  The wrench icon appears to indicate that value has been calibrated or compensated from the original factory settings to allow for your local variances.
(Edited)
Photo of Gary

Gary

  • 10 Posts
  • 1 Reply Like
Thank you very much. I overlooked that in the cal procedure, and yes I upgraded the "topworks" due to the cooling fan not working. Prior to upgrading, I had adjusted the temp readout. After the upgrade I had to re-adjust,,of course, so the "wrenches" are there. Thanks again.
Photo of AcuRite Kevin

AcuRite Kevin

  • 1015 Posts
  • 73 Reply Likes
Hi Gary,

Glad you got it sorted out!  Have a great day!