Four indoor sensors with new Access unit

  • 1
  • Question
  • Updated 6 months ago
I have two houses and I have dual indoor sensors and an outdoor sensor at each one. If I convert one of my hubs to your new access point would I be able to have one unit monitor the outside device and 4 of the indoor devices. We are getting rid of the second home so I would like to be able to use all of the indoor sensors.
Photo of John Coleman

John Coleman

  • 2 Posts
  • 0 Reply Likes

Posted 6 months ago

  • 1
Photo of Ledrak


  • 1538 Posts
  • 350 Reply Likes
John the Access unit can monitor up to 7 compatible sensors indoor or out as long as they are within range.
Photo of George D. Nincehelser

George D. Nincehelser

  • 6756 Posts
  • 1249 Reply Likes
Assuming all devices are within range and with adequate signal strength to the Access, you should have no problems.

The Access currently supports up to 7 devices.
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6428 Posts
  • 200 Reply Likes
Hello John,
Ledrak and George are correct, the Access supports up to 7 sensors.  From your description you are asking if one Access will support 6 sensors in one home. From the information provided, the Access will work to monitor these units.  Please let us know if you have any other questions. Thank you.