Does myacurite.com support PC Connect as well as Smart Hub? I was unable to register my device...

  • 1
  • Question
  • Updated 2 years ago
MyAcuRite.Com and PC Connect
Photo of Leland Sheppard

Leland Sheppard

  • 1 Post
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of AcuRite Jennifer

AcuRite Jennifer

  • 11801 Posts
  • 536 Reply Likes
Hello Leland,

You are able to transmit via Pc Connect and the smartHUB. If you are transmitting the same 5n1 sensor though it will just duplicate the information.  Make sure you have your smartHUB plugged directly into the router. The lights should function as follows: The left blue light is a network status light. It should flash for 1 second each time a reading is sent otherwise it will be steady. The right hand light should be solid steady.  



For PC Connect make sure you have the latest software installed. https://www.acurite.com/kbase/downloads/PC_Connect_My_AcuRite.html  Please make sure you have your display in USB mode 3(depending on the model number of the display you may not have a USB mode). On the PC Connect software under status it should say the display console is detected. Below that last data received should be a current date and time stamp. Below that My AcuRite Sharing should say Data Sending. If it does not please go to Weather Sharing, and make sure you have the box checked that says share my weather data. You will enter your Device ID/ Mac address. Below that you will click share now. Under status you will then see My AcuRite Sharing: Data sending. You will then go to My AcuRite.com, and log into your account. Go to settings and devices and enter your information as requested. Thank you. Have a great day!