do I disconnect the smart hub before connecting access?

  • 1
  • Question
  • Updated 3 months ago

I bought the access and need to know if I disconnect the old smart hub before powering up the new access?



Photo of James Murray

James Murray

  • 2 Posts
  • 0 Reply Likes

Posted 3 months ago

  • 1
Photo of Ledrak

Ledrak

  • 1418 Posts
  • 314 Reply Likes
James it does not really say I hooked mine up side by side with the smarthub just in case I had the open port on the router. I also used the replace option.   https://kbase.myacurite.com/web/content/devices/replace-device.htm  good luck I had no problem
Photo of Steve U

Steve U

  • 404 Posts
  • 54 Reply Likes
You can only have 1 of those linked to WU (id). Both can be linked to MyAcurite (for a test), understanding AUG is the end for the SH
Photo of AcuRite Jennifer

AcuRite Jennifer

  • 11801 Posts
  • 536 Reply Likes
Hello James,

Disconnecting the smartHUB is not required to get the Access to work. Steve U is correct. If you are transmitting to Weather Underground you can only have one connected to your Weather Underground ID.