discrepancy between Pressure data on myAcurite VS WUnderground

  • 1
  • Problem
  • Updated 3 months ago
I have a discrepancy between Pressure data on myAcurite VS WUnderground since switching to the Access Hub. I have a 5 in 1 and 2 remote sensors. I had a SmartHUB and have replaced it with the Access hub. I used the "replace" device button on the myAcurite web site. The process was straightforward. I re-entered my WU account info and without  a hicup it was reporting to WU. My Access hub was physically on and the light was blue for 2 days prior to activating it.

On the myAcurite site the Pressure looks correct the the data curve smooth.



On Wunderground I get

The pressure "jitter" started  at the time I swapped out the SmartHUB with the Access.


Anyone see anything similar?
The other WU data looks ok. I'm missing the WU Summary data but that seems to be a common issue.

Link to my WU
https://www.wunderground.com/personal-weather-station/dashboard?ID=KWIRACIN42#history/s20180329/e20180330/mcustom

-MIke
Photo of Mike W

Mike W

  • 10 Posts
  • 1 Reply Like
  • sad

Posted 3 months ago

  • 1
Photo of George D. Nincehelser

George D. Nincehelser

  • 6581 Posts
  • 1220 Reply Likes
I'd guess your SmartHUB is still reporting data to wunderground along with your Access.

The pressure jitter is the bit of difference between the two barometers.

Make sure your SmartHUB is unplugged from your network.
Photo of Mike W

Mike W

  • 10 Posts
  • 1 Reply Like
Hmmm, interesting thought and that makes total sense.
Yes it was still connected. I've unplugged its CAT5 and will wait.
Photo of Mike W

Mike W

  • 10 Posts
  • 1 Reply Like
Well that fix was easy. Just unplug the SmartHUB and the "Pressure" jitters are gone on WU.
Thank you

(Now if I could just test the email alert with Temps above 80 deg here in Wisconsin - lol)