Chart data download does not show indoor temperature

  • 1
  • Question
  • Updated 3 months ago
I purchased & installed the new Access model 09155M earlier this month, mostly because I was experiencing frequent lost connections when running the PC app.  I'm happy to report that I've only had one lost connection since then and it seemed to have resolved itself.

I have another issue that I've discovered since requesting and receiving my first data download.  The data set does not seem to include the indoor temperature or humidty, and there is no peak wind speed value.

Is that something that can be included data downloads?
Photo of Mark

Mark

  • 5 Posts
  • 1 Reply Like

Posted 3 months ago

  • 1
Photo of joegr

joegr

  • 58 Posts
  • 14 Reply Likes
Do you have an indoor temperature and humidity sensor linked to the access?  Otherwise, there is nothing to be able to know the indoor temperature or humidity.  (If you have a display, be aware that the display can't transmit any readings to the access.)

Peak wind or wind gusts?  Wind gusts have some strict definitions (such as must be at least 12 MPH higher than sustained winds for a short period of time).  Perhaps you haven't had any that met the requirements?
(Edited)
Photo of Mark

Mark

  • 5 Posts
  • 1 Reply Like
The indoor temp & humidity sensors are built in on the model 01036 WX station so I guess that they are not sent as you've indicated.

Peak wind has always had a log entry such as below.  Sorry about the format, I don't see a way to attach a screenshot.


Timestamp Peak Wind Wind Direction 4/6/2018 13:12 10.01961 180 4/6/2018 13:00 10.01961 225 4/6/2018 12:48 12.00023 247.5 4/6/2018 12:36 12.00023 225
Photo of joegr

joegr

  • 58 Posts
  • 14 Reply Likes
I think that the PC app indicated peak winds, but the access does gusts instead. 
You can get a $15 or $20 temperature/humidity sensor that you can link to the access and use for indoor temperature and humidity. 
Photo of Mark

Mark

  • 5 Posts
  • 1 Reply Like
Good idea, thanks!