Can't set-up 06058 Display

  • 1
  • Problem
  • Updated 5 months ago
When I plugged in the 06058 High Resolution display the first time it displayed the AcuRite cloud for about 1 second then went directly to the overview dashboard. It did not go to set-up mode. The overview page has dashes for all the readings. Pressing the buttons on the bottom of the display have no effect. I have unplugged the display for over 5 minutes several times and tried different AC outlets with the same result. This display is part of a AcuRite 01535M Weather Station.
Photo of Bartlett Tennessee

Bartlett Tennessee

  • 3 Posts
  • 0 Reply Likes
  • disappointed

Posted 5 months ago

  • 1
Photo of Ledrak

Ledrak

  • 1538 Posts
  • 350 Reply Likes
Bartlett the button all the way to the left (looks like a gear) should take you to the menu then scroll down to set up.  here are the directions if you do not have     https://www.acurite.com/media/manuals/06058-instructions.pdf.
Photo of Bartlett Tennessee

Bartlett Tennessee

  • 3 Posts
  • 0 Reply Likes
I have pressed all the buttons at the bottom of the display many times - none have any affect. I cannot get off the overview dashboard.
Photo of Ledrak

Ledrak

  • 1538 Posts
  • 350 Reply Likes
Sorry I guess it has problems.  Try leaving it unplugged for a half hour or so and see if it helps, otherwise Acurite is going to have to step in.