5 in 1 display 01512-RX

  • 1
  • Problem
  • Updated 7 days ago
LCD display - numbers missing

The LCD numbers on the rain gauge part of the display are only showing part of the numbers. If you pick the display up, which puts pressure on the lower right corner, the LCDs all work.

How does one get this repaired?
Photo of Rick Boyles

Rick Boyles

  • 1 Post
  • 0 Reply Likes

Posted 3 weeks ago

  • 1
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6134 Posts
  • 194 Reply Likes
Hello Rick,
The following instructions should help resolve any issues you are having with your display. If after troubleshooting has been preformed the issue continues, when and where was this purchased? Thank you.

To do a pinhole reset: (THIS WILL CLEAR ALL OF YOUR HISTORY AND YOUR SETTINGS)

Please verify that you are using a name brand (Rayovac or Energizer) standard alkaline batteries in the display unit. We do not recommend using anything that is heavy duty, rechargeable, store brand or Lithium inside of the display.

- Remove all power, AC adapter and batteries from the display unit.
- Press and hold down the pin hole reset button, located in the battery compartment, for 20 seconds.
- Plug back into AC power and insert recommended batteries.
- Press and hold down the pin hole reset button for an additional 20 seconds.
- Verify that the unit has powered on and once connection has been made, attempt to set time and date.