3-displays stopped receiving signal from sensor - all at the same time. All displays have reset several times.

  • 1
  • Question
  • Updated 4 months ago
With 3-dispays, 1 5-in-1 Pro sensor, & Acu-Link Internet Bridge, all 3-displays stopped receiving signal from sensor - all at the same time. The Acu-Link Bridge continues to work connecting to my smart phone and tablet. All displays have been reset several times with no change. Its now been 5 days without the dispalys working.
Photo of Lloyd Kellogg

Lloyd Kellogg

  • 2 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Ledrak

Ledrak

  • 1506 Posts
  • 335 Reply Likes
Lloyd reading your post your 3 displays stopped receiving the signal from your 5 in 1 at the same time but your access unit is still picking it up.  Sounds like some how your 5 in 1 changed channels. The displays use the ABC settings but the Bridge/Smathub/Access does not. You can try switching your displays to see if you can find it, or you can try cleaning the switch in the 5 in 1 (moving it back and forth a couple of times may clean the contacts) just reset it to the setting the displays are on. After doing this you may need to get each display to search for the sensor again.
(Edited)
Photo of Lloyd Kellogg

Lloyd Kellogg

  • 2 Posts
  • 0 Reply Likes
Ledrak, your suggestion to clean the ABC switch (moving the switch back & forth, and spray contact cleaner) did the trick. Thanks for your help!