06058M monitor cannot keep accurate time.

  • 3
  • Problem
  • Updated 4 months ago
My 06058M has been in service for 2hours and I have lost 30 minutes. How do I keep the time accurate ?
Photo of John Monteleone

John Monteleone

  • 4 Posts
  • 0 Reply Likes

Posted 11 months ago

  • 3
Photo of John Monteleone

John Monteleone

  • 4 Posts
  • 0 Reply Likes
Update it's been two days and it's behind 14 hours. I will be returning the item this week if issue is not resolved
Photo of AcuRite Tori

AcuRite Tori

  • 1368 Posts
  • 50 Reply Likes
Hello John,

 I do see that you posted in another thread as well regarding the same issue. Are you able to verify that the display is set to the correct time zone and DST is set to on if daylight saving time is recognized in your area? If so please try to factory reset the display by accessing the main menu with the gear button then using the up or down button to navigate to factory reset. Follow the on-screen prompts to perform the reset. If this does not correct your issue please let us know. Thank you.
Photo of John Monteleone

John Monteleone

  • 4 Posts
  • 0 Reply Likes
Yes everything is set correctly. And I have tried then restart twice. It is 427pm est Monday and the device has been set for 3 days and the device has slowed to read 855pm set Sunday
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6411 Posts
  • 200 Reply Likes
Hello John,

We have emailed you at the email address on file. Please check your inbox. Thank you.
Photo of Kirk D. Houser

Kirk D. Houser

  • 3 Posts
  • 0 Reply Likes
My new 06058M has been in service for 2 days and the clock advances about 1 hour for about 3 hours of real time.  I have done the factory reset (i.e., accessing the main menu with the gear button, then using the up or down button to navigate to factory reset, and then following the on-screen prompts to perform the reset) multiple times with no success.  Also, the "auto cycle available screens" function runs very slow (e.g., when set to every 15 seconds the screens change slower than once a minute).   Is there a fix for these time-related problems?  Otherwise, how do I do a warranty return? 
Photo of AcuRite Rachell

AcuRite Rachell, Employee

  • 6411 Posts
  • 200 Reply Likes
Hello Kirk,
I can see you are currently in contact with the AcuRite Support Team regarding this issue. Please let us know if you have any other questions. Thank you.