06044 can't be calibrated

  • 1
  • Problem
  • Updated 1 year ago
I have a 01536 station and 8900123 display. Added an 06044 sensor and expanded the system. The readings of the 06044 vary substantially from the 01536, bearly within the +/- tolerances. If the calibration procedure is followed the 01536 can be altered, but not the 06044. Am I missing something?  I'd like the 01536 and 06044 to agree.
Photo of Jim Blank

Jim Blank

  • 1 Post
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of AcuRite Jennifer

AcuRite Jennifer

  • 11801 Posts
  • 536 Reply Likes
Hello Jim,

When you are comparing the readings make sure they are sitting right next to each other for at least 1 hour without touching them. They should be within 4 degrees of each other for the temperature. For the humidity they should be within 10% of each other. There is no way to calibrate the additional sensors just the 5n1 sensor or display information. Thank you.
Photo of Biju Pillai

Biju Pillai

  • 1 Post
  • 0 Reply Likes
how i can calibrate devise modal 06044
Photo of AcuRite Jennifer

AcuRite Jennifer

  • 11801 Posts
  • 536 Reply Likes
Hello Biju,

You are not able to calibrate that sensor on the display as it is an additional sensor. Thank you.