-40 Deg C Showing on Display

  • 1
  • Problem
  • Updated 2 weeks ago
All of a sudden mt 5-in-1 is started to show me -40 Deg C for the temperature. All other functions are working. Guess its a board issue, so can just the board be replaced?

In 5 years this has happened.. Bad Reliability on electronics.
Photo of S D'Mello

S D'Mello

  • 13 Posts
  • 1 Reply Like
  • Frustrated

Posted 2 weeks ago

  • 1
Photo of Mark Johnson

Mark Johnson

  • 9 Posts
  • 0 Reply Likes
contact Acurite or look at their website. They offer a replacement part for certain models at a reasonable price.
Photo of Noel Spalding

Noel Spalding

  • 2 Posts
  • 0 Reply Likes
Hello  ,  I live in Queensland Australia  and I have the identical problem.  It is less than a year old.  About 5 months ago it occurred first and I removed the batteries from the outdoor unit and also from the inside unit.   It briefly  operated  correctly  before  going  to -040  degrees outside again  NOT HAPPY
Photo of Dirk

Dirk

  • 4 Posts
  • 0 Reply Likes

   5 in 1 -40 Deg C for the temperature Repair. 

Check here for the replacement part,

https://www.acurite.com/kbase/11197-VN1HSPCB.html

If yours is the same as the photo (below, in the link)

It is a plug in replacement, you have to be very careful in doing this, as you may damage other components.  Small wires and parts ,Be aware of short wires not to pull them loose.

Either version, I can repair your Weather station even if it is not the same as acurite says.

Contact me if you would like either version repaired  

Dirk

dirksq@cfl.rr.com